GLASS POOL FENCING IN PENRITH & WESTERN SYDNEY
Frameless and semi-frameless glass pool fencing that keeps the view of the backyard and meets the NSW pool barrier rules.
Sydney Fence Group installs frameless and semi-frameless glass pool fencing across Penrith and Western Sydney. We use toughened safety glass on core-drilled or base-plated spigots, built to the NSW pool barrier requirements under AS 1926.1 — minimum 1.2 metre height, compliant self-closing gate and a 900mm non-climbable zone. Call 0447 215 206 for a free measure.
A POOL FENCE THAT PASSES, WITHOUT WALLING OFF YOUR BACKYARD
A pool barrier is one of the few fences in Australia with the law written into it. In NSW it has to be at least 1.2 metres high, there can be no gap under it wider than 100 millimetres, no gap between vertical members wider than 100 millimetres, and there has to be a 900 millimetre non-climbable zone kept clear on the outside. The gate has to be self-closing, self-latching, swing away from the pool, and have the latch at least 1.5 metres up.
Glass gets you all of that without turning the backyard into two separate spaces. You keep the sightline to the pool, which matters for supervision as much as it does for looks, and toughened glass on properly set spigots needs almost nothing from you but a wash.
WHO CALLS US FOR THIS
- New pool builds needing a barrier before the pool can be filled and used
- Owners replacing an old aluminium or timber pool fence
- Anyone who's had a compliance inspection fail
- Sellers and landlords who need a certificate of compliance
- People who want the pool visible from the house
- Renovations where the pool area is being reworked
HOW WE BUILD IT
MEASURE AND CHECK COMPLIANCE
We measure the run and check the whole barrier line against the NSW rules — including the non-climbable zone, which is where most existing fences fail.
SET THE SPIGOTS
Spigots core-drilled into concrete or base-plated and fixed, set dead level. This is the step that decides whether the panels line up.
INSTALL THE GLASS
Toughened panels set, packed and levelled, with the gaps set to the compliant spacing.
HANG AND SET THE GATE
Self-closing hinges and a self-latching latch fitted and adjusted so the gate closes and latches from any open position, every time.
TEST AND CLEAN
Gate cycled and tested, glass cleaned, site cleared.
WHAT IS INCLUDED IN YOUR QUOTE
Anything quoted separately — extra excavation, spoil removal, tricky access, or council-required work — is listed as its own line on the quote before you accept it, not added afterwards.
WHAT DOES IT COST?
Fencing is priced by the metre, but the metre rate on your job depends on things we can only see standing on the block.
Frameless versus semi-frameless — frameless uses thicker glass and more hardware
Whether the spigots core-drill into existing concrete or need a new footing
The number of gates and corners in the run
Access for getting glass panels into the pool area
That's why we measure on site rather than quoting over the phone. The measure is free, the quote is written, and the number on it doesn't move.
WHY US FOR GLASS POOL FENCING
WE CHECK THE WHOLE BARRIER, NOT JUST THE NEW BIT
Most failed inspections aren't about the fence. They're the boundary fence forming part of the barrier, a climbable object inside the non-climbable zone, or a gate that doesn't latch. We look at all of it when we measure.
LEVEL SPIGOTS OR NOTHING LINES UP
Glass shows every millimetre of error. Setting the spigots is slow, careful work and we don't rush it.
WE BUILD THE REST OF THE BOUNDARY TOO
If your boundary fence has to form part of the pool barrier, we can bring that up to standard in the same job instead of sending you to someone else.
RECENT GLASS POOL FENCING INSTALLATIONS
Frameless glass pool fencing in backyard in Glenmore Park
CLICK TO ENLARGE
Core-drilled duplex stainless steel spigots along pool edge
CLICK TO ENLARGE
Self-closing hydraulic glass pool gate in Cranebrook
CLICK TO ENLARGE
Unobstructed view across pool area with frameless glass barrier
CLICK TO ENLARGEGLASS POOL FENCING — YOUR QUESTIONS
A NSW pool barrier must be at least 1.2 metres high measured from the finished ground level on the outside. Gaps under the fence can't exceed 100 millimetres and gaps between vertical members can't exceed 100 millimetres. A 900 millimetre non-climbable zone also has to be kept clear on the outside of the barrier.
SERVICE COVERAGE AREAS FOR GLASS POOL FENCING
We supply and install glass pool fencing across Penrith Council and the broader Western Sydney region.
RELATED FENCING SERVICES
Aluminium Slat Fencing
Horizontal slat privacy screens & pool surrounds.
Modular Walls
Rendered feature walls behind glass pool fencing.
Gates & Automation
Pedestrian & pool gates with compliant latches.
POOL FENCE DUE? WE'LL CHECK THE WHOLE BARRIER FOR FREE.
Tell us the address and roughly how many metres. We'll come out, measure it and put a price in writing.